Castrifice Chemical Pass with a prototype part of the materials ( polypropylene and ceramics), providing high resistance to aggressive environments. Sealed. The presence of a magnetic coupling completely eliminates the leakage of pumped liquids!
Technical characteristics
Feed, m3/h
|
1
|
|
pressure, m
|
10
|
Excessive pressure at the entrance to the pump, MPa (kgf/cm2) no more than
|
0.08 (All; "> 0.08 (All;"> 0.08 (All; "> 0.08 0.8)
|
|
installed power, kW
|
0.25 < /span>
|
the size of the input pipe
|
Prope 40 × 3
|
|
the size of the output pipe
|
Rone 30 × 3
|
mass, kg
|
5.5 < /span>
|
Requirements for the pumped fluid
-
Water water, distilled, deionized;
-
Aqueous solutions of technically detergents (pH not more than 12);
-
solutions based on fluoride;
-
Alkalis solutions with a concentration of not more than 30%;
-
Acid solutions with a concentration:
-
nitrogen - no more than 40%;
-
sulfur - no more than 70%;
-
salt - no more than 35%.
-
Specific volumetric electrical resistance less than 10 5 ohm × m
-
-
The concentration of suspended particles should not exceed 1.25 mg/cm 3 ;
-
particles: up to 0.25 mm;
-
density (ρ): not more than 1500 kg/m 3 ;
-
-6 m 2 /s.
Pump HCM 1/10
- Product Code: Насос ХЦМ 1/10
- Availability: In Stock
