Horizontal spiral pump, single -stage, with nominal characteristics and basic dimensions according to EN 733, with a long connection, with a retractable rear structure, with the shaft interchangeable bushes / protective bushing bushes and wear -resistant housing rings, with a control system installed on the engine. with KSB with KSB SUPREME, non-abomagnetic synchronous reactive engine of the IE4 / IE5 Efficiency class according to IEC TS 60034-30-2: 2016, to work with a variable speed system Ksbâpumpdrive 2 or KSB Pumpdrive 2 ECO without sensors of the rotor position. engine mounting points in accordance with EN 50347, the size of the shell in accordance with Din v 42673 (07-2011). Color: RGB (74, 74, 74); Font-Family: Frutiger, Helvetica, Arial, Sans-Serif; Font-Size: 18px; Vertical-align: inherit; "> atex-compatible version is available.
Review of technical data
q (50 Hz)
1.5-740.0 (m³ / h)
h (50 Hz)
2.0-160.0 (m)
type of bearing
ball bearings < /span>
partition
radially split
drive frequency
50 Hz/60 Hz < /span>
type of drive
Electric engine
drive voltage
Low voltage
explosion protection
IP 55
the number of recordings of the working wheel
single < /span>
Workpoint material (EN standard)
1.4408 / A743 GR CF8 M, CC480K-GS / B30 C90700, JL1040/A 48 CL 35b
type of installation
Long communication
type of adhesion
direct /span>
type of lubricant
lubrication/lubrication of oil
maximum. The permissible fluid temperature < /span>
140.0 (° C)
is guaranteed not to contain silicon
yes /span>
the position of the nozzle
The end of absorption
maximum working pressure
Pn 16
draw-up design
yes /span>
the location of the pump unit
dry set
shaft material (standard EN)
1.4571, C45 + N
standard
En, EN/ANSI < /span>
absorption characteristics
non-grouping
is suitable for drinking water
yes /span>
type of case
Volunte < /span>
type of working wheel
closed/radial
type of connection
Flaint /span>
classification UNSPSC
4015150300 < /span>
body material (standard EN)
1.4408 / A743 GR CF8 M, CC480K-GS / B30 C90700, JL1040/A48CL35B, JS1030/A536 GR 60-40-18
purpose eclass
36410000, 36410100, 36410101 < /span>
installation position
horizontal < /span>
type of shaft seal
Mechanical compaction, oilcoper stuffing < /span>
main applications
industry and processing, water, energy, construction services
body material
cast iron, stainless steel, cast iron with spherical graphite, bronze
maximum pressure on the injection side
| q (50 Hz) | 1.5-740.0 (m³ / h) |
| h (50 Hz) | 2.0-160.0 (m) |
| type of bearing | ball bearings < /span> |
| partition | radially split |
| drive frequency | 50 Hz/60 Hz < /span> |
| type of drive | Electric engine |
| drive voltage | Low voltage |
| explosion protection | IP 55 |
| the number of recordings of the working wheel | single < /span> |
| Workpoint material (EN standard) | 1.4408 / A743 GR CF8 M, CC480K-GS / B30 C90700, JL1040/A 48 CL 35b |
| type of installation | Long communication |
| type of adhesion | direct /span> |
| type of lubricant | lubrication/lubrication of oil |
| maximum. The permissible fluid temperature < /span> | 140.0 (° C) |
| is guaranteed not to contain silicon | yes /span> |
| the position of the nozzle | The end of absorption |
| maximum working pressure | Pn 16 |
| draw-up design | yes /span> |
| the location of the pump unit | dry set |
| shaft material (standard EN) | 1.4571, C45 + N |
| standard | En, EN/ANSI < /span> |
| absorption characteristics | non-grouping |
| is suitable for drinking water | yes /span> |
| type of case | Volunte < /span> |
| type of working wheel | closed/radial |
| type of connection | Flaint /span> |
| classification UNSPSC | 4015150300 < /span> |
| body material (standard EN) | 1.4408 / A743 GR CF8 M, CC480K-GS / B30 C90700, JL1040/A48CL35B, JS1030/A536 GR 60-40-18 |
| purpose eclass | 36410000, 36410100, 36410101 < /span> |
| installation position | horizontal < /span> |
| type of shaft seal | Mechanical compaction, oilcoper stuffing < /span> |
| main applications | industry and processing, water, energy, construction services |
| body material | cast iron, stainless steel, cast iron with spherical graphite, bronze |
| maximum pressure on the injection side |
|
