Poyage with a voluminous housing for horizontal or a vertical installation, single -stage, with the rear drawer, with nominal characteristics on EN 733, a spiral case with radial separation, interchangeable wear -resistant rings of the case, a spiral case with whole -lit legs of the pump, a closed radial impeller with multi -curved shoulder blades, a single mechanical seal according to EN 12756 , sliding bearing from carbon lubricated with a product, a radial-shawing bearing with a lubricant in the engine housing, a non-abomagnetic KSB Supreme Class IE/IE5 engine and a Pumpdrive variable speed system, a version corresponding to ATEX. /span>
Review of technical data
q (50 Hz)
1.5-337.0 (m³ / h)
h (50 Hz)
2.0-99.0 (m)
type of bearing
Sliding bearings
partition
radially split
drive frequency
50 Hz/60 Hz < /span>
type of drive
Electric engine
drive voltage
Low voltage
explosion protection
IP55 < /span>
explosion protection
IP55 < /span>
the number of recordings of the working wheel
single < /span>
Workpoint material (EN standard)
Jl 1040/A48CL35
type of installation
Monoblock < /span>
type of adhesion
direct /span>
type of lubricant
Lubrication of the product
maximum. The permissible fluid temperature < /span>
350.0 (° C)
the position of the nozzle
The end of absorption
maximum working pressure
Pn 16
draw-up design
yes /span>
the location of the pump unit
dry set
shaft material (standard EN)
1.4021 + Qthrc55
absorption characteristics
non-grouping
type of case
Volunte < /span>
type of working wheel
closed/radial
type of connection
Flaint /span>
classification UNSPSC
4015150300 < /span>
body material (standard EN)
JS 1030 / A536 GR 60-40-18
purpose eclass
36410000, 36410100, 36410101 < /span>
installation position
horizontal or vertical
type of shaft seal
mechanical print
main applications
industry and processing, energy, construction services, oil / gas
body material
cast iron with spherical graphite
maximum pressure on the injection side
16.0 (bar)
type of installation
Stationary < /span>
maximum rotation speed
3500.0 (1/ min)
| q (50 Hz) | 1.5-337.0 (m³ / h) |
| h (50 Hz) | 2.0-99.0 (m) |
| type of bearing | Sliding bearings |
| partition | radially split |
| drive frequency | 50 Hz/60 Hz < /span> |
| type of drive | Electric engine |
| drive voltage | Low voltage |
| explosion protection | IP55 < /span> |
| explosion protection | IP55 < /span> |
| the number of recordings of the working wheel | single < /span> |
| Workpoint material (EN standard) | Jl 1040/A48CL35 |
| type of installation | Monoblock < /span> |
| type of adhesion | direct /span> |
| type of lubricant | Lubrication of the product |
| maximum. The permissible fluid temperature < /span> | 350.0 (° C) |
| the position of the nozzle | The end of absorption |
| maximum working pressure | Pn 16 |
| draw-up design | yes /span> |
| the location of the pump unit | dry set |
| shaft material (standard EN) | 1.4021 + Qthrc55 |
| absorption characteristics | non-grouping |
| type of case | Volunte < /span> |
| type of working wheel | closed/radial |
| type of connection | Flaint /span> |
| classification UNSPSC | 4015150300 < /span> |
| body material (standard EN) | JS 1030 / A536 GR 60-40-18 |
| purpose eclass | 36410000, 36410100, 36410101 < /span> |
| installation position | horizontal or vertical |
| type of shaft seal | mechanical print |
| main applications | industry and processing, energy, construction services, oil / gas |
| body material | cast iron with spherical graphite |
| maximum pressure on the injection side | 16.0 (bar) |
| type of installation | Stationary < /span> |
| maximum rotation speed | 3500.0 (1/ min) |
