AMG-unit is three-plunger. < /span>
Purpose. The supply of neutral and aggressive fluids, emulsions, suspensions and other high -pressure environments.
"> ">"> ">"> ">"> ">"> ">"> ">"> ">"> ">"> ">"> " Purpose in the oil and gas industry
Curlery under high pressure In a well with exploration and operational drilling, to maintain formation pressure, as well as for pumping various liquids under high pressure.
- Productivity-up to 20 LLC L /h;
- Pressure-up to 40 MPa.
Three-plunger pump is designed to pump neutral and aggressive liquids, emulsions, suspensions and other liquid media with a temperature of –50ºС to +60ºС ( +120ºС*) and a kinematic viscosity of not more than 80 ° C (mm 2 /s) containing solid particles in an amount of not more than 0.2% in weight and size not more than 0 , 6mm.
constructive performance of the hydroblok:
- Plunger < /span>
- membrane < /span>
Design features of the hydroblok:
- Heated < /span>
- cooling < /span>
Explosionshield execution:
- general-industrial < /span>
- Explosive < /span>
Operating conditions:
Installation Place:
- Outside the heated room
- Under the canopy
- in a heated room
AMG335-80-N-1-N-1-N-1-N-1-N-1-N-1-N-1-N-1-N-1-N-1-N-1-N-1-N-1-N-1-N-1-N-1-N-1-n-1-n-1-n-1-n-1-n-1-n-1-n-1-n-1-n-1-n-1-n-1-n-1-n-1-n-1-n-1-n-1-n-1-n-1-n-1-ns-1-n-1-n-1-n-1-n-1-ns-1-ns-1-ns-1-n. Epdm-uhl1
335– dimensions of the pump; < /span>
80-plunger diameter, mm ;
n-material of the hydraulic part of steel 08x22N6T GOST 5632-72;
1-index, indicating the absence of the absence cooling of the hydraulic part of the pump, without a hydraulic plant, with the removal of the working fluid from the seals of plunger, for pumping liquids with a temperature of –50ºС to +60ºС;
2- *index characterizing The presence of a lubricant, coolant, flushing or water -loading fluid to the seals of plunger, for pumping fluids with a temperature of +60ºС to +120ºС;
Epdm or NBR-sealing material Depending on the pumped environment;
UHL1-climatic execution and category Accommodation according to GOST 15150–69.
The main parameters and characteristics
Technical characteristics of the pump are given in the table . 1.
table 1
|
Diameter of the pump plunger, mm < /span> |
Pressure on the outlet of the pump, MPa |
Submit ** (theoretical, (theoretical, (theoretical, excluding hydraulic and volumetric efficiency), m ">"> ">"> ">"> 3 /h |
||||
|
Frequency of the pump shaft, about /min |
||||||
|
minimum < /span> |
nominal < /span> |
Maximum < /span> |
||||
|
nominal < /span> |
30 < /span> |
100 < /span> |
200 < /span> |
300 < /span> |
320 < /span> |
|
|
| ||||||
