High pressure barrel pumps from radial work wheels, single -stage and two -way, multi -stage, with flanges or end nozzles on DIN and ANSI.
Review of technical data
q (50 Hz)
0.0-1278.0 (m³ / h)
h (50 Hz)
0.0-4000.0 (m)
the barrel of the casing column
yes /span>
type of bearing
Sliding bearings
partition
radially split
drive frequency
50 Hz/60 Hz < /span>
type of drive
Elector, turbine
drive voltage
low voltage, high voltage < /span>
type of first working wheel
single < /span>
the number of recordings of the working wheel
single/dual recording
other types of working wheels
closed/radial
type of installation
Long communication
type of adhesion
Cloe speed clutt, dentate, coupling of variable speeds, direct
type of lubricant
Lubrication under the oil pressure
maximum. The permissible fluid temperature < /span>
200.0 (° С)
the position of the nozzle
variable /span>
maximum working pressure
PN160, PN250, PN320, PN400 >
draw-up design
yes /span>
the location of the pump unit
dry set
absorption characteristics
non-grouping
type of connection
flannia, welded ends
type of fasting casing
ring casing
type of stage case
stage case with diffuser
type of suction casing
ring casing
purpose eclass
36410000, 36410101, 36410100 < < /span>
installation position
horizontal < /span>
type of shaft seal
mechanical print
main applications
Energy, industry and technology < /span>
body material
carbon steel, chrome steel < /span>
maximum pressure on the injection side
400.0 (bar)
maximum absorption pressure
30.0 (bar)
type of installation
Stationary < /span>
maximum rotation speed
6750.0 (1/ min)
| q (50 Hz) | 0.0-1278.0 (m³ / h) |
| h (50 Hz) | 0.0-4000.0 (m) |
| the barrel of the casing column | yes /span> |
| type of bearing | Sliding bearings |
| partition | radially split |
| drive frequency | 50 Hz/60 Hz < /span> |
| type of drive | Elector, turbine |
| drive voltage | low voltage, high voltage < /span> |
| type of first working wheel | single < /span> |
| the number of recordings of the working wheel | single/dual recording |
| other types of working wheels | closed/radial |
| type of installation | Long communication |
| type of adhesion | Cloe speed clutt, dentate, coupling of variable speeds, direct |
| type of lubricant | Lubrication under the oil pressure |
| maximum. The permissible fluid temperature < /span> | 200.0 (° С) |
| the position of the nozzle | variable /span> |
| maximum working pressure | PN160, PN250, PN320, PN400 > |
| draw-up design | yes /span> |
| the location of the pump unit | dry set |
| absorption characteristics | non-grouping |
| type of connection | flannia, welded ends |
| type of fasting casing | ring casing |
| type of stage case | stage case with diffuser |
| type of suction casing | ring casing |
| purpose eclass | 36410000, 36410101, 36410100 < < /span> |
| installation position | horizontal < /span> |
| type of shaft seal | mechanical print |
| main applications | Energy, industry and technology < /span> |
| body material | carbon steel, chrome steel < /span> |
| maximum pressure on the injection side | 400.0 (bar) |
| maximum absorption pressure | 30.0 (bar) |
| type of installation | Stationary < /span> |
| maximum rotation speed | 6750.0 (1/ min) |
