household centrifugal submersible pumps BCP - are designed for water supply, houses with a large consumption water from wells with a diameter of at least 100 mm and open water bodies.
design
An electric pump is an unit consisting of a pump and an electric motor interconnected by a lantern. The pumping part is a multi -stage design. Each step consists of a centrifugal workplace and a discharge placed in a clip. The rotation from the electric motor to the pump shaft is transmitted through the coupling. The electric motor consists of a stator and a rotor placed in a pipe. The stator of the electric motor is sealed and filled with an epoxy compound. The inner cavity of the engine is filled with waterglycerin mixture and sealed with a cuff. The electric motor with the pump is connected through the lantern, inside which the filter is located. A device, protection and control of electric pumps is mounted in the power cord.
material performance
Businesses, couplings, case parts, shafts are made of stainless steel. Work wheels and guides of the pump are made of polycarbonate.
- -Veasure reliability. The average operating resource for refusal is 10,500 hours.
- -In the pumping part, floating working wheels are used. They allow you to pump water with a high sand content.
- -The exclusion of the end seal to protect the electric motor from sand hit by the reliability and service life of the bearing components of the electric motor and protects the electromagnetic iron of the stator and rotor from corrosion.
- -Settes the stator cavity with a compound ensures the electrical safety of the electric motor design and good cooling conditions.
- -In the stator winding, a thermal guide is installed, which protects the electric motor from overheating when the pump is jammed, protracted, low voltage, etc., from T ° 70 ° C. When a temperature is reached 70 ° C, the heat -guide is torn by the power supply circuit. After cooling the electric motor, the pump automatically turns on again.
- -To the degree of protection against electric shock, electric pumps belong to the 1st grade GOST27570.0.
- -Sosa part and electric motor have a coupling connection, which allows, if necessary, with resource production (service life) of the pumping part or electric motor, purchase them and replace them on your own at home.
-
Technical characteristics
brand feed, m³/h pressure, m current, and power consumption, kW voltage, in the length of the pump l, mm the mass of the pump, kg BCP-0.4 -12 1.44 12 1.8 0.4 220 490 15 BCP-0.4 -18 1.44 18 2 0.5 220 510 16 BCP-0.4 -25 1.44 25 3.2 0.7 220 570 18 BCP-0.4 -40 1.44 40 3.85 0.9 220 670 21 BCP-0.4 -63 1.44 63 6.05 1.35 220 770 27 BCP-0.4 -80 1.44 80 8.5 1.8 220 960 43 BCP-0.4 -100 1.44 100 11 2.4 220 1055 49 BCP-0.4 -120 1.44 120 12.4 2.6 220 1125 55 BCP-0.63 -12 2.26 12 1.7 0.5 220 485 15 BCP-0.63 -18 2.26 18 2.25 0.6 220 545 16 BCP-0.63 -25 2.26 25 3.2 0.75 220 580 18 BCP-0.63 -40 2.26 40 5.45 1.2 220 690 23 BCP-0.63 -63 2.26 63 9.3 1.9 220 900 40 - Pumps BCP-1.5" Don " :
Maximum sodaPumps Power, kVA 6,3 Flow, cubic meters/hour 25 pressure 60
- Pumps BCP-1.5" Don " :
