At the ANS-130t pump, the drive from VOM to the pump is carried out by wedge belts through the pulley of the pump shaft.
The ACS-130T pump is designed for pumping:
- hydro -mixtures (a mixture of non -aggressive liquid with a hydrogen indicator pH = 6 ... 10 with sand, slag, etc.);
- household and industrial wastewater;
- pure and polluted waters in construction, when draining trenches and pits, in irrigation, on transport, etc. The characteristics of the pumped environment: - the density of the hydroxy of up to 1250 kg/cubic meter;
;- temperature from +5 C to +70 C; - the content of solid particles is not more than 10%; - max value of solid particles of not more than 10mm.
Technical characteristics of the pump 130t pump are given below.
|
feed, m3/h, ma x
|
130 |
|
pressure, m |
11.5 |
|
self -consumption height, m |
4.3 |
|
self -consumption time, min |
5 |
|
Frequency of rotation of the shaft, rph |
3000 |
|
efficiency, % (no less) |
51.6 |
|
diameter of the suction and pressure sleeve, mm |
100 |
|
mass (pump itself), kg (no more) |
110 |
|
overall dimensions, mm no more than length, width, in height, n |
685 714 770 |
|
feed, m3/h, ma x < /Strong> |
130 |
|
Ples, m < /span> |
11.5 |
|
Self -consumption height, m |
4.3 |
|
self -consumption time, min |
5 |
|
Frequency of rotation of the shaft, rpm |
3000 |
|
efficiency, % (no less) |
51.6 |
|
diameter of the suction and pressure sleeves, mm |
100 |
|
mass (the pump itself), kg (no more) |
110 |
|
Gabarit dimensions, mm no more than length, width, in height, n |
685 714 770 |
