Pump VShN-150/30 is designed for pumping:
- hydrosons (clay solutions, a mixture of water with sand, ore, etc.);
- household and industrial wastewater;
- spent flushing solution;
- a hydraulic cyclone installation for cleaning from the broken rock;
- flushing solution used for drilling wells.
Characterization of the pumped environment:
- hydroxide density, up to 1,300 kg/cubic meter
- Temperature, from +5 C to + 50 C
- content of solid particles, no more than 25 %
- max value of solid particles, no more than 20 mm
Technical characteristics of the NSN pump 150/30:
SUMM - 150 m3/h;
Ples - 30 m;
The diameter of the working wheel is 360 mm;
Diameter of the pipe:
- suction - 125 mm
- pressure - 125 mm
Material:
- the running part - gray cast iron
- protective disk (armored vehicle) of the case - steel 40x
The overall dimensions are 1810x875x650 mm
The mass is no more - 620 kg;
Type of the working wheel - open;
Fastening - bolts on containers or design on order;
Electric drive:
- Engine type - VA180M4
- Explosion safety - 1ExDIIBT4X
- Power - 30 kW
- Rotation frequency - 1,500 rpm
- degree of protection - IP54
Pump vertical sludge owl 150/30
The console centrifugal vertical pump, single -stage with the working wheel of a unilateral entrance, with an axial fluid supply, with a drive from an electric motor through an elastic coupling. The working bodies are made of 40x steel.
The pump is designed for pumping:
abrasive hydrosons (clay and gravel solutions, a mixture of water with sand, ore, etc.);
flushing solution used for drilling wells;
household and industrial wastewater;
spent flushing solution into a hydraulic cyclone unit for cleaning from broken rock.
The characteristics of the pumped environment:
The density of the hydroxy of up to 1300 kg/m 3 ;
Temperature from +5 C to +60 CO;
The content of solid particles is not more than 25%;
The maximum value of solid particles is not more than 20 mm.
| Pumps | |
| Power/speed | 630/1000 |
| Flow, cubic meters/hour | 1250 |
| pressure | 71 |
