The vertical sludge pump of the VShN-150 is specially designed to work with abrasive pulps with a density of up to 1300 kg/cube. meter. The vertical sludge pump VShN-150 is characterized by a strong design, convenient in maintenance and repair.
The price of the VSHN-150 pump to a large extent contributes to the wide (mass) use of the pump in various industries.
The vertical sludge pump VShN-150 is designed on the basis of a horizontal console pump type GSHN.
Marking of the NSHN-150 pump includes the design features and performance of the pump-a vertical sludge pump with a capacity of 150 cubic meters. meters per hour.
The vertical sludge pump VShN-150 has a two blap open working wheel capable of passing solid particles in size up to 20 mm.
The vertical sludge pump of the VShN-150 at the installation site is attached with bolts through the supporting plate on the case. To ensure convenient access, the BSN-150 pump bearings are located in the housing above the supporting plate. The VShN-150 pump cannot work without load. The operation of the VShN-150 pump for dry without a pumped environment is not allowed.
By order, the vertical sludge pump VShN-150 can be made with an elongated shaft.
The shaft of the vertical sludge pump VShN-150 has a modular design, with
placing a bearing node above the supporting plate. In the NShN-150 pump there are no flooded bearings and shaft sealing oil seals. This design makes it easier for the maintenance of the VShN-150 pump and eliminates the need to use complex and expensive seals.
The shaft of the vertical sludge pump VShN-150 rotates in motionlessly fixed bearings lubricated by consistent lubricant.
The pump is designed for pumping:
- ">"> ">"> ">"> ">"> ">"> ">">
abrasive hydrosons (clay and gravel solutions, a mixture of water with sand, ore, etc.);
- ">"> ">"> ">"> ">"> ">"> ">">
flushing solution used for drilling wells;
- ">"> ">"> ">"> ">"> ">"> ">">
household and industrial wastewater;
- ">"> ">"> ">"> ">"> ">"> ">">
spent flushing solution into a hydraulic cyclone unit for cleaning from broken rock.
Characteristics of the pumped environment:
- ">"> ">"> ">"> ">"> ">"> ">">
Hydosmes density up to 1300 kg/m 3 ;
- ">"> ">"> ">"> ">"> ">"> ">">
Temperature from +5 С to +60 s O ;
- ">"> ">"> ">"> ">"> ">"> ">">
The content of solid particles is not more than 25%;
- ">"> ">"> ">"> ">"> ">"> ">">
The maximum value of solid particles is not more than 20 mm.
- ">"> ">"> ">"> ">"> ">"> ">"> Hydosmes density up to 1300 kg/m 3 ;
- ">"> ">"> ">"> ">"> ">"> ">"> Temperature from +5 С to +60 s O ;
- ">"> ">"> ">"> ">"> ">"> ">"> The content of solid particles is not more than 25%;
- ">"> ">"> ">"> ">"> ">"> ">"> The maximum value of solid particles is not more than 20 mm.
| Pumps | |
| Power/speed | 630/1000 |
| Flow, cubic meters/hour | 1250 |
| pressure | 71 |
