Appointment: /Strong> condensate type pumps and pumping units based on them are designed to pump condensate in steam-water networks of thermal and energy blocks of TPP, as well as pure water with temperature up to 140 0 C in heat and heat systems and Water supply.
Design: /Strong> condensate KSV pumps- centrifugal, vertical, single-flow, one- or multi-stage, two-building with a common internal section of the sectional type. The KSV pump 200-130-with the working wheel of the first stage of the bilateral entrance. The outer building is welded with pipes for welding to pipelines. Rotor supports are: lower - sliding bearing, built into work on a pumped environment; Upper - remote roller bearings with plastic or crankcase grease. Unloading the rotor from axial forces is hydraulic using hydraulic or unloading drum. Shaft seals-mechanical with a saline stuffing (-c) interchangeable with mechanical end (-t).
Materials: < /Strong>
- Corps, covers and sections- Forging and leaf roller consignment of carbon steels;
- parts of the prototype and pouring and pouring and Klusters of chromium steels 20x13l and 30x13;
- Llealed parts-unprotected corrosion-resistant alloys;
- VAL-variety rental from structural maintenance alloy steel 40x.
Complement: < /Strong>
- for mounting the engine and auxiliary pipelines within the pump;
- of the drive electric motor;
- ;
- parts of fastening of the pump and engine;
- SIP.
