">"> "> Electroly pumping types "KS"-centrifugal, condensate, condensate, condensate Horizontal, multi -stage are designed to pump condensate in steam networks of thermal power plants operating on organic fuel, as well as liquids similar to condensate in viscosity, chemical activity and the content of solid particles. The condensate should have < Span Style = "Font-Family: Tahoma, Arial, Helvetica, Sans-Serif; Font-Size: 12px;"> Hydrogen indicator pH 6.8 ... 9.2 and should not contain solid particles in size of more than 0.1 mm and a concentration of not more than 5 mg/l.
The temperature of the pumped fluid is 398 K (+125 s) .
Pressure at the entrance to the electric pump for more than 0.39mpa (4 kgf/cm2).
Double Salnic shaft.
Purpose: pumps of the CS type, and pumping units based on such an ACC -based ACC, are designed to pump condensate in steam -watering networks of thermal and energy blocks of TPP, as well as pure water with temperature up to 160 0 C in the systems of heat and water supply.
Design: condensate CS pumps - centrifugal, horizontal, single -flow, multi -stage, sectional. Rotor supports are remote rolling bearings with plastic lubrication (CS). Shaft seals-mechanical with a saline stuffing (-c) interchangeable with mechanical end (-t).
Materials:
- covers and sections - forks made of carbon steels;
- details of the prototype part - pouring and oxation of chromium steels 20x13l and 30x13;
- Details of slotting seals - unprotected corrosion -resistant alloys;
- shaft - varietal rental made of structural alloy steel 40x.
Complete:
- A collected pump with auxiliary pipelines within the pump;
- Representative flanges on the pipes;
- drive electric motor;
- Connecting coupling type MUVP or MUP with a fence;
- General foundation frame;
- Parts of fastening the pump, engine and fence of the coupling;
- SIP set.
Electric pumps "KS"-centrifugal, condensate, horizontal, multi-stage are designed to pump condensate In steam networks of thermal power plants operating on organic fuel, as well as liquids similar to condensate in viscosity, chemical activity and the content of solid particles. The condensate should have
The hydrogen indicator pH 6.8 ... 9.2 and should not contain solid particles the size of more than 0.1 mm and a concentration of not more than 5 mg/l.
The temperature of the pumped liquid is 398 K (+125 C).
Pressure at the entrance to the electric pump for more than 0.39mpa (4 kgf/cm2). < /Span>
Double saline shaft-double saline.
