Homogenizer GM1.5/20M2D (1,500 liters per hour)

Homogenizer GM1.5/20M2D (1,500 liters per hour)

Momogenizer GM1.5 /20m2d (1,500 liters per hour)

Designed for high pressure of milk, cream, cottage cheese and cheese products, other dairy products, as well as juices with pulp, fruit and vegetable puree. Homogenizers are used in the production of viscous lubricants, automasals and other lubricants.

Advantages of the homogenizer GM1.5/20M2D (1,500 liters per hour):

• Smooth pressure adjustment from 0 to 20 MPa (200 bar)
• In the homogenizer hydrogenic hydrogen, special ball intake and exhaust valves are used (Fig. 2), which allows you to pump products with increased viscosity, fat content and the content of dry valves without loss of productivity and the absence of valve freezing
• A special design of plunger fastening has been applied (Fig. 2), which allows you to significantly increase the service life of plunger compaction cuffs
• A closed cooling system of plunger, which allows you to improve the removal of heat
• A special electric pressure sensor with a built -in pulsation quencher (Fig. 3) and a digital pressure indicator
• MOTHERS counter (Fig. 4)
• Sensor of the presence of plunger cooling fluid
• Low noise and vibration level due to small speeds of the crankshaft
• An original lubricant system that reduces the cost of maintaining a homogenizer
• An increased service life due to the interchange of plunger.

Technical characteristics homogenizer GM1.5/20M2D (1,500 liters per hour) :

A set of supplies of a homogenizer GM1.5/20M2D (1,500 liters per hour):

Homogenizer model GM1.5/20m2d
Performance 1 500 liters per hour
Working pressure 20 MPa (200 atm)
Recommended product temperature +70 0 with ± 5 0 s
The number of double passages of plunger per minute 250
Homogenizing node 2-step with manual control
Number of plunger 3
Electric motor power 15 kW
Voltage 380v
Frequency 50Hz
Water consumption for cooling plunger no more than 100 liters per hour
Noise level no more than 70 dB
Entrance to the homogenizer DU35
Homogenizer exit DU35
Dimensional dimensions 955 x 823 x 1546 mm
Weight 760 kg

Write a review

Note: HTML is not translated!
   
Bad           Good
0 reviews / Write a review

Request for

1 Homogenizer GM1.5/20M2D with a two -stage homogenizing node with manual control 1 pcs
1.1 Forced cooling system of plunger
1.2 Enjoyant system of lubrication of the drive mechanism
1.3 Electric pressure sensor with a built -in pulsation quencher (Fig. 3) and a digital pressure indicator
1.4 The MOMOGenizer control panel (turning on/off the homogenizer, indication of the operating mode, automatic blocking of the starting of the homogenizer at low water supply for cooling, when overheating of oil, meters meter) is built (Fig. 4)
1.5 Stainless steel cladding 12x18n10t
2 Passport GM1.5/20M2.Ps 1 pcs
3 Passport for a pressure sensor 1 pcs
4 Operation Guide to the Motor Motor Motors SM-03 1 pcs
5 Canister with I-50A oil, 10l 1 pcs
6 Anth -humorous headphones like 1440 1 pcs
7 ZIP standard 1 kt
Option . Demepfer Pulsation - KGM1.5-000 compensator (see Fig. 5) 2 pcs
Option . Manometer (0 ... 10 atm) with a dividing membrane DN35 + the tee equipped with DN35. Product input pressure control 1 pcs