Pump unit unit

Pump unit unit

<"> < Strong> An-50 is designed to injure the flushing liquid during drilling of oil and gas wells; to pump water into the layer during the intensification of oil production; To pump various non -aggressive liquids, including flooded oil.

A clay solution or water can be used as a flushing or pumped liquid. The content of mechanical impurities (sand, solid particles of broken breed) should be no more than 1% in volume with hardness up to 1200 units. On the scale NV.

Composition
  • Rama;
  • Piston pump;
  • electric motor;
  • Brishmal transmission;
  • Fencing of cuneiform transmission.

The rotation of the transmission shaft of the pump is carried out from an explosion -proof electric motor through a cuneiform transmission. The piston pump is attached to the aggregate frame using bolts. The electric motor is installed on the stove, which is attached to the aggregate frame with bolts. On the frame of the unit, grooves are provided for the mounting bolts of the electric motor slabs to adjust the tension of the belts of wedge -repair transmission.

Technical characteristics

Constructive executions of pumping units

Power, kW 50
The speed of rotation of the transmission shaft, rpm 394
The speed of rotation of the electric motor shaft, rpm 1000
Clinical gear straps S (c) 4000 VI classes
Box of the pump transmission GOST 1284.1-89
Number of belts, pcs. 5
Dimensional dimensions, no more, mm 3200x1050x1440
Sound level in the service zone, DBA 85

<"> < Strong> An-125 is designed to injure the flushing liquid during drilling of oil and gas wells; to pump water into the layer during the intensification of oil production; To pump various non -aggressive liquids, including flooded oil.

The rotation drive of the transmission shaft of the pump is carried out from Explosion -proof electric motor through a cuneiform transmission. The piston pump is attached to the aggregate frame using bolts. The electric motor is installed on the stove, which is attached to the aggregate frame with bolts. On the aggregate frame, grooves are provided for the mounting bolts of the electric motor slabs to adjust the tension of the belts of wedge -rephid transmission.

Technical characteristics

">;"> Execution of the unit An50.00.00.000 ">;"> -01 ">;"> -02 ">;"> -03 ">;"> -04
Diameter of interchangeable bushings, mm 90 120 120 120 120
Power of the electric motor, M.KW 45 45 45 55 55
DIGNED FORD, L/S 5.8 11 11 11 11
Maximum pressure, MPa 5.4 5.4 5.4 6.3 6.3
Mass, kg 1980 1980 1980 1983 1983
The location of the pulley Right Right Left Right Left

Write a review

Note: HTML is not translated!
   
Bad           Good
0 reviews / Write a review

Request for

Power, kW 125
The speed of rotation of the transmission shaft, rpm 511; 388; 337
The speed of rotation of the electric motor shaft, rpm 1000; 1500
Engine power, kW 55; 75; 90; 132; 160
The number of belts, pcs 5