MTF 011-6 crane engine, MTH 011-6 Krane MTF electric motors with a phase rotor and a MTKF series with a short-closed rotor
MTF 011-6, MTH 011-6
MTF crane electric motors with a phase rotor and a MTKF series with a short-closed rotor are designed to drive crane and other general-purpose mechanisms, the work of which is characterized by short-term and repeated modes and large multiple of overloads. Environmental temperature from minus 45 to 40 ° C and relative humidity not more than 80% at 25 °.
Metallurgical electric motors of the MTN and MTKN series are designed for metallurgical production drives and other drives operating at elevated ambient temperatures from minus 45 to 50 ° C and relative humidity not more than 98% at 25 ° C. The electric motors of the MTKF and MTKN series are one- and two-speed, increased sliding are designed for direct start from a full voltage network. Electric motors of the MTF, MTKF, MTT and MTKN series are characterized by increased overload, large starting moments with relatively small starting currents, as well as a low acceleration time.
Last update (11.05.2011)
Installation executions of crane engines
Installation executions of crane engines:
(IM1001, IM1002) - horizontal, with one and two cylindrical ends of the shaft;
(IM2001)-horizontal-flanes with one cylindrical end of the shaft;
(IM2011, IM2012)-vertically-flanes with one and two cylindrical ends of the shaft;
(IM1003, IM1004) - horizontal, with one and two conical ends of the shaft;
(IM2003, IM2004)-horizontal-flanes, with one and two conical ends of the shaft;
(IM2013, IM2014)-vertically-flanes with one and two conical ends of the shaft.
| Motor | |
| Power kW | 7,5 |
| Frequency rpm | 1000 |
